RH-QDA-06-HB08

UQD06 to 1/2 in Hose Barb Adapter

316L SSUQD06PG25

The workhorse size for rack manifold whips and CDU bench hookups: G 3/8 BSPP male into the UQD06 termination, 1/2 in multi-barb out to hose. Sealing is a peroxide-cured EPDM O-ring on the BSPP boss. Passivated per ASTM A967.

Body material	316L stainless steel, machined from bar
Seal material	EPDM O-ring, 70A, peroxide-cured (PG25 / DI water compatible)
UQD side	G 3/8 BSPP male per ISO 228-1; fits UQD06 G 3/8 female termination
Hose side	1/2 in multi-barb; use band or 2-ear clamp on PG25-rated hose
Working pressure	Designed to 150 psi (10.3 bar); ORV3 secondary loops typically run below 50 psi
Temperature range	-4 to 194 F (-20 to 90 C)
Finish	Passivated per ASTM A967; cleaned, capped, and bagged
Wrench flats	11/16 in hex

$84/ ea

In-stock parts ship in 5-7 business days

PO instead? Send it over

Direct from the shop that machines it

316L stainless on every wetted surface, mill certs available on request

Cleaned, capped, and bagged for coolant service before it ships

In-stock parts ship in 5-7 business days from Van Alstyne, Texas

POs and net-30 for approved accounts; card payment by secure link